Delta Computer Services

The Stick Call Processor

A programmable, three-port tel/fax/modem switch

• Description of The Stick
• Features
• Specification
• Requirements and Recommendations

Check for Clearance Bargains!

Description of The Stick

The Stick is a programmable, three-port switch. Connected to a single incoming telephone line it provides three ports (RJ11 with BT adapters provided). These are set up for Voice (phone / answering machine), Fax and Modem but you can use other combinations of telephone devices. It can be connected to the master socket or to an extension socket.

In its default UK configuration, when a call is answered, The Stick will recognise fax tones and divert the call to the Fax port. Modems dialling in must issue the correct Security Access Code to reach your own modem, thus your PC and data are protected. Voice calls are simply handled as normal by you or your answering machine.

The Stick can be programmed to auto-answer calls on the first ring and screen for fax tones or DTMF before ringing the appropriate port. However, in this mode, voice callers hear a US-style ring back. So this mode of operation is more suited to remote sensing and data logging applications; it is not recommended for lines likely to receive incoming voice calls.

You can manually divert an incoming call to another port by dialling its code. The caller can also route the call if he knows the code.

Each port has a programmable access code (like an extension number) of up to four digits. So, for example, if you are sharing business and domestic phones on The Stick, business calls in the evening could go to the answering machine on the Voice whilst authorised callers could dial the code to get through to your private telephone on one of the other ports.

The Stick provides barge-in protection, which means that a call in progress cannot be interrupted by another device. (Obviously this only applies to devices plugged into other ports on The Stick.)

The Stick has an Unanswered Call Transfer feature. This means you can program The Stick to route unanswered calls to another port after a specified number of rings. Programming The Stick is achieved simply, via your telephone keypad.

The Stick is designed in the USA but is sold here ready for the UK market with BT connectors, UK mains adapter and with a manual re-written for the UK.

The Stick will work on ordinary, analogue (PSTN) telephone lines. It will work on broadband (ADSL) lines off the voice socket of the microfilter. It cannot be connected directly to an ISDN line but could be used on the Voice port of an ISDN router.

Features of The Stick

• Fax tone (CNG) detection
• Modem protection and routing by Security Access Code
• DTMF dial tone detection
• Manual or auto-answer modes with call screening and auto-routing
• Numerous programmable features
• Barge-in protection
• Unanswered call auto-transfer

Specification of The Stick

• The Stick main unit
• Mains power adapter
• BT Line cord
• RJ11-BT adapters for the three ports
• Quick Start Guide in hard copy with full manual on disk

• Power supply requirements: 220-240V 50/60Hz
• Power consumption: 6.2W
• REN: 0.5B REN
• Dimensions: 8.15" x 1.4" x 2.4" approx. (210mm x 35mm x 60mm approx.)
• Weight: main unit 0.3kg approx. Shipping weight: 1.1kg

Specifications are subject to change without notice.

Requirements and Recommendations

• Standard BT phone socket on an analogue line or the phone socket on an ADSL line - but see our page on ADSL Issues (opens in new window)
• Standard 13A mains power socket

Important warranty information.

• Like all telephone equipment connected to a landline, this product may be damaged by voltage surges during thunderstorms. Such damage is not covered by the warranty.

Latest pricing / Buy online